Muffle Furnace Standard/Gmp Model Upto 1400 Deg C
MISMO Make Muffle furnace are used for routine laboratory application like incineration , backing, drying, annealing, heat treatment of metal and material testing, ash content , volatility of matter etc.
MISMO Make muffle furnace are light weight , compact design, short up heating time , high grade insulation and with all safety features to provide the best of the accuracy.
- Type of Furnace : Electrically Heated Muffle furnace.
- Working Temp Range : 5 degree above ambient to 1300 deg c
- Maximum Working temperature : 1400 deg c for Max 2 hr only
- Temp Accuracy : +/- 3 degree .
- Temp. Uniformity : +/- 5 degree throughout the chamber.
- Muffle is made of High dense ceramic Board.
- The lining of the door is done by High quality Ceramic Board.
- Temp. Display : Digital LED 3 ½ digit , Resolution 1 degree C.
- Back Port ventury system for quick exhaust.
- A grade S type sensor used for better accuracy.
- No contact of Hot surface to body for heatloss prevention.
- Front Hole for observation with shutter Knob.
- Triple walled , gap between body and muffle will be filled by high density ceramic blanket & Ceramic Board.
- Standard Model : Body is made of heavy guage Powder- coated CRC exterior.
- GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.
- Hinged door with single lever for door lock.
- 4” Thick heavy density ceramic blanket Insulation.
- Unit Mounted on castor wheels with front lock arrangement.
- Heater is made of Silicon carbide Heating rod equally placed in the muffle.
- The heater is designed with low watt density for better life of the heater and to remove thermal shock to the chamber.
Control Panel :-
- Microprocessor based PID Profile controller , Programmable upto 8 steps /segment per programme of Ramp/soak Profile, In built memory for resumption of running programme in case of power disturbance, auto switch of on the completion of the cycle , Programmable heating rate upto 5 to 25 deg C /minute. *
- Temp. Sensor : S type . Measure Maximum upto 1600 deg C.
- Necessary switch gears to indicate the status of the power supply and heater .
- Reputed Make ampere meter and Voltmeter.
- Main switch MCB for switching on/off the power.
- Dedicated safety controller with separate sensor to cut off the heater in case of overshoot . (Optional , Extra at cost)
- Recorder data bank offline to store and print set values , process values , date and time of master controllers with variable print time intervals ( Optional) ( RCR-11)
- PC Interface communication card with RS 485 for temperature control system ( Hardware only) ( optional)
- PC Interface software for temperature controlling as well as online recording with facility to visualise the data in chart form, in bar chart form, in graph form or in excel worksheet form.( Optional , extra at cost)